Course Descriptions

Helpful Hint for Searching: Use the “Type” drop down box if you are unfamiliar with the College prefixes.

Prerequisite: a course you must successfully complete prior to enrolling in the course for which it is listed as a prerequisite. You must receive a grade of C (2.0) or better in order for the course to satisfy a prerequisite requirement, unless otherwise specified in the course description.

Corequisite: a course you may enroll in simultaneously as the course for which it is listed as a corequisite.

Co-enrolled: a course you must enroll in while simultaneously enrolled in another designated course.

Contact hour disclaimer: Weekly lecture/lab/external contact hours denoted in all course descriptions reference a standard sixteen (16) week fall or spring semester. For non-standard semesters/sessions (e.g. summer semesters, winter/spring mini-mesters, 12-week sessions, etc.), the lecture/lab/external material will be covered over a shorter period of time, resulting in more hours each week. Total contact hours will remain the same for each course regardless of the semester/session type or the teaching modality (e.g. internet, blended, face-to-face, etc.). Detailed weekly hour combinations are available in the specific course syllabus.

Types of Course Fees:

Online Course Fees: A $25 per course fee covering the cost of software and equipment will be charged for online and blended course sections.

Course/Lab/SIM Lab/Testing Fees: These fees are additional charges, approved by the Blinn College Board of Trustees, for specific courses that have demonstrably higher costs of delivering instruction because of the need for special equipment, supplies, use of facilities, technology, software, field trips, testing costs, or lessons required by the course.

Book Fee (First Day™/Inclusive Access):
First Day is a B&N Bookstore’s Inclusive Access program. With this program, the cost of course materials is added, by Blinn College, as a charge for the course. Students receive benefits including:

Deeply discounted textbook
The guaranteed right textbook
Single Sign-On (no access codes)
Access on or before the first day of class

Courses included in the Core Curriculum are noted as a Core Curriculum Course after the course title.

Note: The second digit of a course rubric identifies the number of credit hours a student will earn upon completing the course. For example: ENGL 1301 is a 3 credit hour course, as denoted by the 2^nd digit.

Course Filter
Filter this list of courses using course prefix, course code, keywords or any combination.
Prefix:	Code or Number:	Keyword or Phrase:
Choose Course Prefix	Choose Course Number	Choose Keyword
Find whole word or phrase only.


Other Courses
	AGME 1307 Agriculture Equipment and Tools CIP Code: 01.0205 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 4 External Hours: 0 Contact Hour Total: 96 Introduction to hand tool and shop equipment skills and safety. Prerequisite(s): n/a Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	AGME 1315 Farm and Ranch Shop Skills I CIP Code: 01.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 4 External Hours: 0 Contact Hour Total: 96 Study and application of shop skills used in agricultural processes including arc welding, oxyacetylene cutting and welding, drawing and planning projects, tool maintenance, metal working, woodworking, plumbing, and concrete. Prerequisite(s): none Corequisite(s): none Co-enrolled: none Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	ARTV 1341 3D Animation I CIP Code: 10.0304 Credit Hours: 3 Lecture Hours: 3 Lab Hours: 1 External Hours: 0 Contact Hour Total: 64 Intermediate level 3-D course introducing animation tools and techniques used to create movement. Emphasis on using the principles of animation. Prerequisite(s): None Corequisite(s): None Co-enrolled: None Course Fee: 25.00 Lab Fee: 0 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	ARTV 1345 3-D Modeling and Rendering Credit Hours: 3 Lecture Hours: 3 Lab Hours: 1 External Hours: 0 Contact Hour Total: 64 Techniques of three-dimensional (3-D) modeling utilizing industry standard software. Includes the creation and modification of 3-D geometric shapes, use of a variety of rendering techniques, camera, light sources, texture, and surface mapping. Prerequisite(s): None Corequisite(s): None Co-enrolled: None Course Fee: 25.00 Lab Fee: 0 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	ARTV 2301 2-D Animation I CIP Code: 10.0304 Credit Hours: 3 Lecture Hours: 3 Lab Hours: 1 External Hours: 0 Contact Hour Total: 64 Skill development in the use of software to develop storyboards and two-dimensional animation including creating, importing, and sequencing media elements to create multimedia presentation. Emphasis on conceptualization, creativity, and visual aesthetics. Prerequisite(s): ARTV 1351 - Digital Video Corequisite(s): None Co-enrolled: None Course Fee: 25.00 Lab Fee: 0 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CBFM 2386 Internship – Building/Property Maintenance and Manager CIP Code: 46.0401 Credit Hours: 3 Lecture Hours: 0 Lab Hours: 0 External Hours: 9 Contact Hour Total: 144 A work-based learning experience that enables the student to apply specialized occupational theory, skills and concepts. A learning plan is developed by the college and the employer. Prerequisite(s): CRPT 1329 (or) ELPT 1311 (or) HART 1307 (or) HVAC 1341 (or) HART 1345 (or) EPCT 1328 & CNBT 1210 Corequisite(s): None Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CBFM 2387 Internship - Building/Property Maintenance and Manager CIP Code: 46.0401 Credit Hours: 3 Lecture Hours: 0 Lab Hours: 0 External Hours: 9 Contact Hour Total: 0 A work-based learning experience that enables the student to apply specialized occupational theory, skills and concepts. A learning plan is developed by the college and the employer. Prerequisite(s): CRPT 1329 (or) ELPT 1311 (or) HART 1307 (or) HVAC 1341 (or) HART 1345 (or) EPCT 1328 & CNBT 1210 Corequisite(s): None Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CETT 2337 Microcomputer Control CIP Code: 15.1201 Credit Hours: 3 Lecture Hours: 3 Lab Hours: 1 External Hours: 0 Contact Hour Total: 64 A study of microprocessors microcontollers with an emphasis on embedded controllers for industrial and commercial applications. Prerequisite(s): Not Applicable. Advanced level course. Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CNBT 1010 Basic Construction Safety Contact Hour Total: 72
	CNBT 1210 Basic Construction Safety CIP Code: 15.1001 Credit Hours: 2 Lecture Hours: 1 Lab Hours: 3 External Hours: 0 Contact Hour Total: 64 Basic job site construction safety in residential, commercial, and industrial construction. Prerequisite(s): None Corequisite(s): None Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CNBT 1300 Residential and Light Commercial Blueprint Reading CIP Code: 15.1001 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 Introductory blueprint reading for residential and light commercial construction. Prerequisite(s): None Corequisite(s): None Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CNBT 1318 Roof Systems CIP Code: 46.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 Comprehensive study of the selection and use of hand tools, portable power and stationary power tools and related construction equipment. Prerequisite(s): None Corequisite(s): None Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CRPT 1029 Introduction to Carpentry CIP Code: 46.0201 Contact Hour Total: 128 Use established safe work practices; describe fasteners and adhesives; define terms associated with building materials utilized by carpenters; describe handling and storage procedures; demonstrate the use and care of tools and equipment; and perform mathematical computations used by the carpenter.
	CRPT 1311 Roof Systems CIP Code: 46.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 Principles of design and construction of a roof system incorporating gable, hip, valley and intersections. Emphasis given to safe work practices and the use, and maintenance of tools and equipment. Prerequisite(s): CRPT 1329 *AND* CNBT 1210 Corequisite(s): CRPT 1329 *AND* CNBT 1210 Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CRPT 1315 Wall Systems CIP Code: 46.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 Identification of components; construction of wall systems; safe work practices; and the use, and maintenance of tools and equipment. Prerequisite(s): CRPT 1329 *AND* CNBT 1210 Corequisite(s): CRPT 1329 *AND* CNBT 1210 Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CRPT 1323 Floor Systems CIP Code: 46.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 An introduction to common floor systems. Includes component identification; construction of a floor system; safe work practices; and the use, and maintenance of tools and equipment. Prerequisite(s): CRPT 1329 *AND* CNBT 1210 Corequisite(s): CRPT 1329 *AND* CNBT 1210 Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CRPT 1325 Forms and Foundations CIP Code: 46.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 Construction of basic form and foundation systems including related safety, tools, equipment, and building layout. Emphasis on safe work practices and the use, and maintenance of tools and equipment. Prerequisite(s): CRPT 1329 *AND* CNBT 1210 Corequisite(s): CRPT 1329 *AND* CNBT 1210 Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CRPT 1329 Introduction to Carpentry CIP Code: 46.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 An introduction to the carpentry trade including safety, tools, equipment, terminology, and methods. Prerequisite(s): None Corequisite(s): None Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CRPT 1341 Exterior Finish Systems CIP Code: 46.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 Installation of exterior finish systems and components including the placement and installation of cornice, windows, doors, siding, and flashing. Emphasis on safe work practices and the use, and maintenance of tools and equipment. Prerequisite(s): CRPT 1329 *AND* CNBT 1210 Corequisite(s): CRPT 1329 *AND* CNBT 1210 Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CRPT 1345 Interior Finish Systems CIP Code: 46.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 Installation of interior finish systems and components including the placement and installation of doors, trim, floor, wall, and ceiling finishes. Emphasis on safe work practices and use, and maintenance of tools and equipment. Prerequisite(s): CRPT 1329 *AND* CNBT 1210 Corequisite(s): CRPT 1329 *AND* CNBT 1210 Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CRPT 1391 Special Topics in Carpentry CIP Code: 46.0201 Credit Hours: 3 Lecture Hours: 2 Lab Hours: 2 External Hours: 0 Contact Hour Total: 64 Topics address recently identified current events, skills, knowledges, and/or attitudes and behaviors pertinent to the technology or occupation and relevant to the professional development of the student. This course was designed to be repeated multiple times to improve student proficiency. Prerequisite(s): None Corequisite(s): None Co-enrolled: None Course Fee: 100 Texas Higher Education Coordinating Board Workforce Education Course Manual (WECM) course
	CVOP 1013 Professional Truck Driver I CIP Code: 49.0205 Contact Hour Total: 105 Overview of the State of Texas Class A Commercial Drivers License written test. Includes preparation for mastery of the Commercial Drivers License written examination, general truck driving skills with hands-on component, and instruction coordinated with the Department of Transportation.
	CVOP 1040 Professional Truck Driver II CIP Code: 49.0205 Contact Hour Total: 105 A continuation of Professional Truck Driver I. General truck driving with hands-on skill development and instruction coordinated with the Department of Transportation.
	DANC 1112 Dance Practicum CIP Code: 50.0301.53 26 Credit Hours: 1 Lecture Hours: 0 Lab Hours: 3 External Hours: 0 Contact Hour Total: 48 Practicum in dance related topics with emphasis on practical skills necessary for the field. May be repeated for credit once. Prerequisite(s): NA Corequisite(s): NA Co-enrolled: Required for students taking any spring dance course. Course Fee: 0 Lab Fee: 35.00 Texas Higher Education Coordinating Board Lower Division Academic Course Guide Manual (ACGM) course
	DANC 1151 Freshman Dance Performance CIP Code: 50.0301.52 26 Credit Hours: 1 Lecture Hours: 0 Lab Hours: 3 External Hours: 0 Contact Hour Total: 48 Instruction in dance performance through experiential projects at the freshman level. May be repeated for credit once. Prerequisite(s): NA Corequisite(s): NA Co-enrolled: NA Course Fee: 0 Lab Fee: 35.00 Texas Higher Education Coordinating Board Lower Division Academic Course Guide Manual (ACGM) course
	DANC 1201 Dance Composition-Improvisation CIP Code: 50.0301.55 26 Credit Hours: 2 Lecture Hours: 2 Lab Hours: 0 External Hours: 0 Contact Hour Total: 32 This introductory course in improvisation will investigate spontaneous problem solving as a means of generating movement for dance composition Students will be called upon to explore and respond to various forms of stimuli in a safe and supportive learning environment within solo and group work. Prerequisite(s): NA Corequisite(s): NA Co-enrolled: NA Course Fee: 35.00 Lab Fee: 0 Texas Higher Education Coordinating Board Lower Division Academic Course Guide Manual (ACGM) course
	DANC 1241 Beginning Ballet CIP Code: 50.0301.52 26 Credit Hours: 2 Lecture Hours: 1 Lab Hours: 3 External Hours: 0 Contact Hour Total: 64 Instruction in the fundamental techniques and concepts associated with ballet. May be repeated for credit once. Prerequisite(s): Na Corequisite(s): NA Co-enrolled: NA Course Fee: 0 Lab Fee: 35.00 Texas Higher Education Coordinating Board Lower Division Academic Course Guide Manual (ACGM) course
	DANC 1245 Beginning Modern Dance CIP Code: 50.0301.52 26 Credit Hours: 2 Lecture Hours: 1 Lab Hours: 3 External Hours: 0 Contact Hour Total: 64 Instruction in the fundamental techniques and concepts associated with the concert form of modern dance. May be repeated for credit once. Prerequisite(s): NA Corequisite(s): NA Co-enrolled: NA Course Fee: 0 Lab Fee: 35.00 Texas Higher Education Coordinating Board Lower Division Academic Course Guide Manual (ACGM) course









































































Page: 1 \| 2 \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10

Print this Page

Course Descriptions

AGME 1307 Agriculture Equipment and Tools

AGME 1315 Farm and Ranch Shop Skills I

ARTV 1341 3D Animation I

ARTV 1345 3-D Modeling and Rendering

ARTV 2301 2-D Animation I

CBFM 2386 Internship – Building/Property Maintenance and Manager

CBFM 2387 Internship - Building/Property Maintenance and Manager

CETT 2337 Microcomputer Control

CNBT 1010 Basic Construction Safety

CNBT 1210 Basic Construction Safety

CNBT 1300 Residential and Light Commercial Blueprint Reading

CNBT 1318 Roof Systems

CRPT 1029 Introduction to Carpentry

CRPT 1311 Roof Systems

CRPT 1315 Wall Systems

CRPT 1323 Floor Systems

CRPT 1325 Forms and Foundations

CRPT 1329 Introduction to Carpentry

CRPT 1341 Exterior Finish Systems

CRPT 1345 Interior Finish Systems

CRPT 1391 Special Topics in Carpentry

CVOP 1013 Professional Truck Driver I

CVOP 1040 Professional Truck Driver II

DANC 1112 Dance Practicum

DANC 1151 Freshman Dance Performance

DANC 1201 Dance Composition-Improvisation

DANC 1241 Beginning Ballet

DANC 1245 Beginning Modern Dance